The clean window is an auxiliary equipment of the clean room. The clean window is mainly used for the transfer of small objects between the clean area and the clean area, and the clean area and the non-clean area, so as to reduce the number of clean room doors and reduce the pollution degree of the clean room.

Traditional clean windows require ultraviolet lamps for disinfection, but the ultraviolet lamps are fixed on the top of the sampling vehicle, and the disinfection capabilities of different internal positions are different, which is easy to cause bacterial leakage. The delivery of clean windows and clean air mainly depends on the fixed air outlet, which affects the purification function.

The realization elements of clean window technology:
In order to solve the above problems, the utility model provides a clean window. By designing an angle-adjustable UV light and a rolling air outlet, the space of thesampling cart is sterilized and rolling air is provided to ensure the cleanliness of the sampling cart.

In order to achieve the above purpose, the utility model adopts the following technical scheme, a clean window, including a form, the form is a stainless steel shell, the interior is a stainless steel plate, the bottom is a relay station, and the front and rear openings to the top cover are air diffusers, which are connected to a movable glass door, The two sides of the movable sliding glass door are connected to the sliding grooves on both sides of the window opening; the top of the window is provided with an air inlet, and the lower part of the air inlet is connected with an air supply device. The air supply is connected to the filter. The air is sucked in by the centrifugal fan system, and the air of the clean window is sent into the window through the primary effect and the filter, and the pressure output is uniform. The front end of the filter 5 is a rotating air outlet belt, which is divided into a rotating air outlet casing and a rotating part. The shell of the air outlet belt is fixedly connected with the four sides of the filter, and the rotating part is provided with several air outlet rods. The rotating outlet belt and the horizontal plane are angled towards the dirty area, and the motor is located outside the center of the rotating part. There are ultraviolet germicidal lamps and lighting lamps under the wind belt shell. The installation of ultraviolet germicidal lamps and lighting lamps is divided into two parts, with brackets and angle adjustment rods. The brackets and angle adjustment rods are fixedly connected to the outer germicidal lamps and lighting through buckles. At both ends of the lamp, the bracket is installed on one side of the hinge, and the other side is connected with an angle adjustment rod, which is a hydraulic rod; two electric switch buttons are connected in parallel with the air supply unit, filter, rotating air belt, and ultraviolet germicidal lamp. It is connected in series with the light switch, and any door can be opened by touching the switch to realize the opening of the air supply unit, filter, rotating air belt, ultraviolet germicidal lamp and lamp.

The utility model has the following advantages:

1. The working area is made of stainless steel plate, which is smooth and smooth, and the inner corners are arc transitions.

2. The doors on both sides of the conversion window have the interconnection function of fan activation, so that the opening of any door can automatically supply air.

3. Lighting and ultraviolet germicidal lamps should be used synchronously with the start of the fan.